Cost-optimised dual-core Cortex-A7 embedded board with in-package DDR3, RGB/LVDS output and a 7-year Linux BSP.
Evaluation units ship in 5 working days. Customised variants quoted within 3 working days of receiving your requirement.
The T113S3 HMI Display Module is the entry point of our industrial HMI line — designed for machine builders who need a genuine Linux user interface at a price point that used to buy only a monochrome MCU panel.
In-package DDR3L removes the highest-risk part of a memory layout, which is why this module routinely passes EMC testing on the first attempt. Combined with the integrated display controller, a complete 7" or 10.1" HMI reduces to one module, one panel and one carrier board with your connectors on it.
We supply the module as a castellated / board-to-board SoM, as a ready-made carrier assembly, or as a fully customised single board built to your mechanical drawing through our manufacturing coordination network.
The XuanTie C906 core handles deterministic I/O and boot-critical tasks while Linux runs on the Cortex-A7 pair — first frame on screen in under 1.5 seconds with a tuned image.
128 MB or 256 MB SiP memory eliminates DDR routing risk, shrinks the PCB to 4 layers and improves radiated-emission margins.
CAN 2.0B, two RS485-ready UARTs and Modbus RTU / TCP stacks are supported out of the box — no USB-serial bridges in the signal path.
Parallel RGB888 and single-channel LVDS with a configurable timing table; we pre-flash the timing for whichever panel you specify.
Qt 5.15 / Qt 6, LVGL 8/9, Slint or a Chromium kiosk build — delivered as a bootable image with your splash screen and application pre-installed.
Committed availability through 2033 with change-notification (PCN) discipline and a last-time-buy programme.
Standard configuration shown. Memory, storage, interface population, operating temperature grade and board outline can all be changed for OEM builds.
| Processor | Allwinner T113-S3, dual-core Arm Cortex-A7 @ 1.2 GHz, XuanTie C906 RISC-V co-processor, HiFi4 audio DSP |
|---|---|
| Memory | 128 MB / 256 MB DDR3L, system-in-package |
| Storage | 8 GB eMMC standard (up to 64 GB); SPI NAND and microSD options |
| Display output | Parallel RGB888 and single-channel LVDS (8-bit), up to 1280 x 800 @ 60 Hz |
| Touch | I2C capacitive (GT911 / FT5x06 family) and 4-wire resistive |
| Ethernet | 1 x 10/100 Mbps with integrated MAC and PHY |
| USB | 2 x USB 2.0 host, 1 x USB 2.0 OTG |
| Serial / fieldbus | 6 x UART (2 x RS485-ready), 4 x I2C, 3 x SPI, 1 x CAN 2.0B |
| Audio | 2 x I2S, analogue mic input, 3 W mono class-D amplifier |
| Wireless (optional) | Wi-Fi 4 + Bluetooth 5.0 module, 4G LTE via USB, LoRa via UART |
| Operating system | Tina Linux 5.4 (kernel 5.4 LTS), Buildroot, OpenHarmony |
| Power | 5 V DC single rail, 1.8 W typical / 3.5 W peak |
| Operating temperature | -20 C to +70 C standard, -40 C to +85 C on request |
| Dimensions | 80 x 60 mm module; carrier board dimensions to customer drawing |
| Compliance | CE, FCC, RoHS 3, REACH; UKCA on request |
| MOQ / lead time | 100 pcs, 4-6 weeks after design freeze |
Need the full datasheet, 3D STEP model or a test report? Request them with your quote and we will send them the same day.
Integrated smart-display SoC with on-chip TCON — one board drives the panel, the touch and the application logic.
Quad Cortex-A55 embedded board with an on-chip NPU and dual camera inputs — interface and inference on one board.
Quad Cortex-A55 industrial board with dual Gigabit Ethernet, dual CAN-FD and a 10-year supply commitment.
Every platform on this site started as a customer-specific design. Ours is a customisation business that happens to keep a standard catalogue.
Connector placement, mounting hole pattern and board outline adapted to your existing enclosure.
Swap Ethernet for a second CAN channel, add isolated RS485, or expose GPIO on a terminal block.
Module + TFT + PCAP touch + backlight cable delivered as a single tested assembly with one part number.
Custom boot logo, splash animation, locked-down kiosk shell and OTA update channel.
Pre-compliance EMC scans plus documentation packs for CE / FCC / UKCA submission.
Send the panel size, interface list, temperature range and target volume. You will get a configuration, a price and a lead time — from an engineer, within one business day.
Your message goes directly to the application engineer responsible for this platform.